32322 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32322 bore dia is 110 mm. Its out dia is 240 mm. 32322 roller material is Roller_Material. Its seal type is Seal_Bearing. The 32322 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

32322 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32322 bore dia is 110 mm. Its out dia is 240 mm. 32322 roller material is Roller_Material. Its seal type is Seal_Bearing. The 32322 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

Typical applications include:

 

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.

General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.

Part Number	32322
Cone Part Number	X32322M
Cup Part Number	Y32322M
System of Measurement	Metric
Type	Bearing
Bearing Type	Roller
Roller Bearing Type	Tapered
For Load Direction	Combined
Construction	Single Row
Seal Type	Open
Cups Type	Standard
Series	32322
Bore Dia	110 mm
Bore Dia Tolerance	-0.02mm to 0
Outer Dia	240 mm
Outer Dia Tolerance	-0.03mm to 0
Cone Width	80 mm
Cone Width Tolerance	-0.15mm to 0
Cup Width	65 mm
Cup Width Tolerance	-0.25mm to 0
Width	84.5 mm
Width Tolerance	+0.2mm to -0.2mm
Cone Backface ToClear Radius	4 mm
Cup Backface ToClear Radius	3 mm
Cone Frontface Backing Diameter	136 mm
Cone Backface Backing Diameter	143 mm
Cup Frontface Backing Diameter	222.5 mm
Cup Backface Backing Diameter	215 mm
Cage Cone Frontface Clearance	6.6 mm
Cage Cone Backface Clearance	12.4 mm
Effective Center Location	-27.9 mm
Ring Material	Chrome Steel
Roller Material	Chrome Steel
Cage Material	Steel
Dynamic Radial Load	171000 lbf
Static Radial Load	229500 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90)	44325 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90)	26100 lbf
Lubrication	Required
Temperature Range	-30° to 110 °C
ABEC Rating	ABEC-1
Radial Clearance	Standard (Available in C3/C4/C5)
RoHS	Compliant
REACH	Compliant
Weight	37.46 lb

Automotive Industry

—

Petroleum Machinery Industry

—

Machine Tool Industry

—

Outboard Motor

—

Steel Plant

—