32224 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32224 bore dia is 120 mm. Its out dia is 215 mm. 32224 roller material is Roller_Material. Its seal type is Seal_Bearing. The 32224 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

32224 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32224 bore dia is 120 mm. Its out dia is 215 mm. 32224 roller material is Roller_Material. Its seal type is Seal_Bearing. The 32224 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

Typical applications include:

 

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.

General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.

Part Number	32224
Cone Part Number	X32224M
Cup Part Number	Y32224M
System of Measurement	Metric
Type	Bearing
Bearing Type	Roller
Roller Bearing Type	Tapered
For Load Direction	Combined
Construction	Single Row
Seal Type	Open
Cups Type	Standard
Series	32224M
Bore Dia	120 mm
Bore Dia Tolerance	-0.02mm to 0
Outer Dia	215 mm
Outer Dia Tolerance	-0.03mm to 0
Cone Width	58 mm
Cone Width Tolerance	-0.15mm to 0
Cup Width	50 mm
Cup Width Tolerance	-0.25mm to 0
Width	61.5 mm
Width Tolerance	+0.2mm to -0.2mm
Cone Backface ToClear Radius	3.05 mm
Cup Backface ToClear Radius	2.54 mm
Cone Frontface Backing Diameter	135 mm
Cone Backface Backing Diameter	147 mm
Cup Frontface Backing Diameter	204.98 mm
Cup Backface Backing Diameter	191.01 mm
Cage Cone Frontface Clearance	5.6 mm
Cage Cone Backface Clearance	5.3 mm
Effective Center Location	-10.2 mm
Ring Material	Chrome Steel
Roller Material	Chrome Steel
Cage Material	Steel
Dynamic Radial Load	131850 lbf
Static Radial Load	186975 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90)	34200 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90)	25425 lbf
Lubrication	Required
Temperature Range	-30° to 110 °C
ABEC Rating	ABEC-1
Radial Clearance	Standard (Available in C3/C4/C5)
RoHS	Compliant
REACH	Compliant
Weight	20.5 lb

Automotive Industry

—

Petroleum Machinery Industry

—

Machine Tool Industry

—

Outboard Motor

—

Steel Plant

—