31328X TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 31328X bore dia is 140 mm. Its out dia is 300 mm. 31328X roller material is Roller_Material. Its seal type is Seal_Bearing. The 31328X TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

31328X TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 31328X bore dia is 140 mm. Its out dia is 300 mm. 31328X roller material is Roller_Material. Its seal type is Seal_Bearing. The 31328X TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

Typical applications include:

 

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.

General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.

Part Number	31328X
Cone Part Number	X31328X
Cup Part Number	Y31328X
System of Measurement	Metric
Type	Bearing
Bearing Type	Roller
Roller Bearing Type	Tapered
For Load Direction	Combined
Construction	Single Row
Seal Type	Open
Cups Type	Standard
Series	31328X
Bore Dia	140 mm
Bore Dia Tolerance	-0.025mm to 0
Outer Dia	300 mm
Outer Dia Tolerance	-0.035mm to 0
Cone Width	70 mm
Cone Width Tolerance	-0.2mm to 0
Cup Width	47 mm
Cup Width Tolerance	-0.25mm to 0
Width	77 mm
Width Tolerance	+0.35mm to -0.25mm
Cone Backface ToClear Radius	5 mm
Cup Backface ToClear Radius	4 mm
Cone Frontface Backing Diameter	171 mm
Cone Backface Backing Diameter	199 mm
Cup Frontface Backing Diameter	280.4 mm
Cup Backface Backing Diameter	257 mm
Cage Cone Frontface Clearance	9.7 mm
Cage Cone Backface Clearance	16.5 mm
Effective Center Location	16.5 mm
Ring Material	Chrome Steel
Roller Material	Chrome Steel
Cage Material	Steel
Dynamic Radial Load	202500 lbf
Static Radial Load	229500 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90)	52425 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90)	74250 lbf
Lubrication	Required
Temperature Range	-30° to 110 °C
ABEC Rating	ABEC-1
Radial Clearance	Standard (Available in C3/C4/C5)
RoHS	Compliant
REACH	Compliant
Weight	50.38 lb

Automotive Industry

—

Petroleum Machinery Industry

—

Machine Tool Industry

—

Outboard Motor

—

Steel Plant

—