32021X TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32021X bore dia is 105 mm. Its out dia is 160 mm. 32021X roller material is Roller_Material. Its seal type is Seal_Bearing. The 32021X TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

32021X TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32021X bore dia is 105 mm. Its out dia is 160 mm. 32021X roller material is Roller_Material. Its seal type is Seal_Bearing. The 32021X TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

Typical applications include:

 

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.

General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.

Part Number	32021X
Cone Part Number	X32021XM
Cup Part Number	Y32021XM
System of Measurement	Metric
Type	Bearing
Bearing Type	Roller
Roller Bearing Type	Tapered
For Load Direction	Combined
Construction	Single Row
Seal Type	Open
Cups Type	Standard
Series	32021XM
Bore Dia	105 mm
Bore Dia Tolerance	-0.02mm to 0
Outer Dia	160 mm
Outer Dia Tolerance	-0.025mm to 0
Cone Width	35 mm
Cone Width Tolerance	-0.15mm to 0
Cup Width	26 mm
Cup Width Tolerance	-0.2mm to 0
Width	35 mm
Width Tolerance	+0.2mm to -0.2mm
Cone Backface ToClear Radius	2.54 mm
Cup Backface ToClear Radius	2.03 mm
Cone Frontface Backing Diameter	113 mm
Cone Backface Backing Diameter	119 mm
Cup Frontface Backing Diameter	154.43 mm
Cup Backface Backing Diameter	147.07 mm
Cage Cone Frontface Clearance	3.3 mm
Cage Cone Backface Clearance	2.8 mm
Effective Center Location	-0.3 mm
Ring Material	Chrome Steel
Roller Material	Chrome Steel
Cage Material	Steel
Dynamic Radial Load	60525 lbf
Static Radial Load	76275 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90)	15705 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90)	11947.5 lbf
Lubrication	Required
Temperature Range	-30° to 110 °C
ABEC Rating	ABEC-1
Radial Clearance	Standard (Available in C3/C4/C5)
RoHS	Compliant
REACH	Compliant
Weight	5.29 lb

Automotive Industry

—

Petroleum Machinery Industry

—

Machine Tool Industry

—

Outboard Motor

—

Steel Plant

—